Safety valves are essential in pipeline construction as well as in other closed construction systems such as biogas plants and industrial facilities. They are not only mandatory by law, but also lifesaving safety devices. They are used to prevent overpressure that can result in environmentally harmful gases and fluids. If you want to make sure that your facility is protected against overpressure, you will need to work with safety valves. NieRuf is an expert in that market segment and therefore a competent specialist for those who wish to install safety valves. No matter which nominal size, seal variety or connection variety you need to install, we will have the matching product in stock. Please do not hesitate to talk to us. We would love to advise you on our valve models.
Safety valves are essential in pipeline construction as well as in other closed construction systems such as biogas plants and industrial facilities. They are not only mandatory by law, but also lifesaving safety devices. They are used to prevent overpressure that can result in environmentally harmful gases and fluids. If you want to make sure that your facility is protected against overpressure, you will need to work with safety valves. NieRuf is an expert in that market segment and therefore a competent specialist for those who wish to install safety valves. No matter which nominal size, seal variety or connection variety you need to install, we will have the matching product in stock. Please do not hesitate to talk to us. We would love to advise you on our valve models.
flange-safety valve DN80/DN125 SF04 for liquid and gaseous media made of stainless steel seal FKM set pressure 0,2 - 40,0 bar with lifting device lever
flange-safety valve DN65/DN100 SF06 for liquid and gaseous media made of Spheriodal graphite cast iron 5.1303 seal metal set pressure 0,3 - 40,0 bar with lifting device lever
safety valve with with bellows 2" m x 2" fm Typ SV04 with male screw threaded BSP-P NBR-seal for liquid media made of gunmetal with with lever
cryo-safety-valve DN8 3/8" m x 3/8" fm SV14 for nitrogen made of stainless steel seal PTFE pressure 0,2 - 70,0 bar
safety valve 1/2" m x 1/2" fm SV13 for liquid and gaseous media made of stainless steel seal EPDM pressure 0,2 - 25,0 bar with lever
gunmetal-safety valve with with bellows for liquid media FKM 1/2" m x 1" fm Typ SV04 with male screw threaded BSP-P and twist-type lifting mechanism
flange-safety valve entry DN15 exit DN15 for liquid and gaseous media, made of stainless steel seal FPM pressure 0,5 up to max. 40 bar
safety-valve with with lever 1 1/2" x 2" fm Typ SV03 with Female screw threaded BSP-P PTFE-seal for neutral liquid media made of gunmetal without bellows
safety valve 3/8" m Typ SV02 atmospheric discharg for air, made of stainless steel with an FKM seal, pressure 0,2 - 25,0 bar- higher pressures possible in PTFE version
flange-safety valve DN100/DN150 SF04 for liquid and gaseous media made of stainless steel seal FKM set pressure 0,2 - 40,0 bar without lifting device
diaphragm-safety valve 2" x 2" fm SV16 seal EPDM, set pressure 1,0 - 16,0 bar. for cooling-/ chilling plants
safety-valve male thread 1 1/4" m x 2" fm NBR stainless steel Typ SV05 for neutral liquid media with with lever
safety valve 1 1/4" m x 2" fm made ofsengewinde SV07 for neutral gaseous media made of gunmetal seal NBR set pressure 0,5 - 25,0 bar- higher pressures possible in PTFE version
flange-safety valve DN20/DN32 SF06 for liquid and gaseous media made of Spheriodal graphite cast iron 5.1303 seal metal set pressure 0,8 - 40,0 bar with lifting device lever
safety valve 1/2" m x 1" fm made ofsengewinde SV07 for neutral gaseous media made of gunmetal seal NBR set pressure 0,5 - 25,0 bar- higher pressures possible in PTFE version
safety valve mit einem with bellows 1 1/2" m x 2" fm SV10 for gaseous media made of stainless steel seal EPDM set pressure 0,5 - 25,0 bar- higher pressures possible in PTFE version
safety valve 1" m Typ SV01 atmospheric discharg for air, made of brass with an FKM seal, pressure 0,2 - 25,0 bar- higher pressures possible in PTFE version
cryo-safety-valve DN32 1 1/2" m x 2" fm SV14 for cryogenic liquified gases made of stainless steel seal PTFE pressure 0,2 - 50,0 bar
flange-safety valve DN20/DN32 SF06 for liquid and gaseous media made of Spheriodal graphite cast iron 5.1303 seal metal set pressure 0,2 - 40,0 bar without lifting device
safety valve 1 1/2" mit with bellows SV08 for gaseous media made of gunmetal seal EPDM set pressure 0,5 - 25,0 bar- higher pressures possible in PTFE version twist-type lifting mechanism
flange-safety valve DN32/DN50 SF06 for gaseous media made of Spheriodal graphite cast iron 5.1303 seal metal set pressure 0,2 - 40,0 bar with lifting device lever
safety valve 2" x 2" fm set pressure 0,5 - 50,0 bar for neutral gaseous media made of gunmetal seal PTFE with an twist-type lifting mechanism
flange-safety valve DN80/DN125 SF06 for liquid and gaseous media made of Spheriodal graphite cast iron 5.1303 seal EPDM set pressure 0,2 - 40,0 bar without lifting device
flange-safety valve DN20/DN20 made of cast iron EN-JL1040 seal FPM pressure 0,5 up to max. 16 bar lifting with lever
Steam boiler, pressure or transportation tanks up to gas lines – safety valves are all over. In an emergency case they prevent closed construction systems from overpressure. In terms of safety valves and other auxiliary equipment we are well positioned. This is why we can offer an outstanding and complete selection of products. Each safety valve is EG-type-tested and TUV-certified. Therefore all our safety valves match the DIN EN 4126-1 safety norm. In our online shop you will find a variety of high quality products for compressed air, fluids, fumes and gases. For whatever purpose you need to use a safety valve, we are sure that you will find the appropriate in the multitude of our selection.
Specifications:
| connection: | thread: 1/4", 3/8“, 1/2“, 3/4“, 1“, 1 ¼“, 1 ½“, 2" |
| pressure range: |
0,2 - 630 bar - depending on design |
| material: | stainless steel, steel, brass, gunmetal |
| temperature: | -10 degree Celsius to + 400 degree Celsius - depending on design |
No matter which specifications like seals, set pressure and temperature are required, we will find exactly the right safety valve for you. In our store you will find valves that are approved for -196 degree Celsius to 400 degree Celsius. Furthermore we deliver approved valves for pressures from as low as 0.2 bar up to 630 bar. We guarantee excellent processing and products of brilliant quality formed from the best materials such as stainless steel, brass, gunmetal, cast-iron and steel. Every safety valve certified by DIN EN 4126-1 is made in the way that it prevents a pressure build-up of maximum 10% in closed construction systems. Please feel free to use our web shop multitude of products to get exactly the matching one for your special area of application.
Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.
You can reach us from Monday to Friday at +497143 9666900 and any time at sales@nieruf.com
Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.
We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.
Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.
We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.
Contact For all questions we are available by phone
Mo - Fr 08:30 - 17:00
or send us an e-mail:
Resistance check 
Frequently asked questions 
Configurator 
Angle seat valves
Ball valves
Butterfly valves
Coaxial valves
Compensators
DISCO check valves
Flow control valve
Globe valves
Knife gate valve
Manometer gauge valve
Needle valves
Overflow valves
Pressure reducing valves
Safety valves
Sight glass
Solenoid valve
Strainer
check valves
diaphragm valve
vent-valve
Need help?
If you have any questions, we are available by phone from Monday to Friday from 8:30 a.m. to 5:00 p.m.
order via mail:
